Vertical Cylinder Honing Machine
HPSM’ Vertical Honing Machine is fabricated structure using high quality steel, adequately designed to give minimum deflection under full load. The Machine consists of reciprocating Honing Head, Spindle is run through Hydraulic Motor, and Reciprocation is through hydraulic, hydraulic tool expansion system. The incorporation of most modern user friendly PLC systems makes machine operations simple. Job holding fixtures are provided suitable to component. These all-automatic machines enable the user to run continuous production and at the same time achieve a high degree of accuracy and repeatability.
Salient Features
- This machines is hydraulicaly operated with variable spindle speeds and feeds, and also you can hone the bore with any hacth angle
- Digital Display is the friendly feature for the quick identification of the honning speeds
| TECHNICAL SPECIFICATIONS | HPS – 450EL | HPS – 450 | HPS – 350 |
| Minimum honing diameter | 62 mm(2.5″) | 62 mm(2.5″) | 62 mm (2.5”) |
| Maximum honing diameter | 200 mm(8″) | 200 mm(8″) | 140 mm(5.5”) |
| Honing diameter with extra honing head | 250 mm(10″) | 250 mm(10″) (1.5” – 8”) | 38 mm-200 mm |
| Minimum honing stroke | 50 mm(1.96″) | 50 mm(1.96″) | 50 mm (1.96”) |
| Maximum honing stroke | 450 mm(17.7″) | 450 mm(17.7″) | 350 mm (13.7”) |
| Stroke speed (infinitely variable) | 1-12 m/min | 1-12m/min | 1-12 m/min |
| Spindle speed variable | 25-200 rpm-3 hp drive | 25-200rpm-3hp drive | 25-200 rpm |
| Motor spindle drive | 1.5 kw/2 hp | 1.5kw/2hp | 1.5 kw/2hp |
| Max. Block length | 1400 mm(55.1″) | 1100mm(55.1″) | 1100 mm |
| Max. Block width | 550 mm(21.7″) | 550mm(21.7″) | 550 mm |
| Max. Block height | 600 mm(23.6″) | 600mm(23.6″) | 450 mm |
| Motor power pack | 0.75 kw/1 hp | 0.75kw/1hp | 0.75 kw/1hp |
| Electric coolant pump motor | 0.09 kw/0.12 hp | 0.09 kw/0.12 hp | 0.09 k/ 0.12 hp |
| Honing head traverse | 1300 mm | 1000 mm | 1000 mm (39.3”) |
| Length of the machine | 1920 mm | 1620 mm | 1620 mm ( 63.7”) |
| Width of the machine | 1300 mm | 1300 mm | 1300 mm (51.2”) |
| Height of the machine | 1850 mm | 1850 mm | 1750 mm (74”) |
| Work space required (L x W x H) | 2000 x 1400 x 2070 mm (78.7″ x 55″ x 81.5″) | 1700 x 1400 x 2070 mm (67 x 55” x 77.5”) | 1700 x 1400 x 1970 mm (67 x 55” x 77.5”) |
| Net weight (approx.) | 900 kgs | 750 kgs | 720 kg |
| Gross weight (approx.) | 1600 kgs | 1250 kgs | 1200 kg |
| Shipping volume | 8 m3 | 6 m3 | 6 m3 |
| Packing case outer size (L x W x H) | 2200 x 1500 x 2145 mm (86.6″ x 65″ x 84.4″) | 1900 x 1500 x 2145 mm (74.8” x 59” x 84.4”) | 1900 x 1500 1950 mm (74.8” x 59” x 85”) |
| STANDARD ACCESSORIES | HPS – 450EL | HPS – 450 | HPS – 350 |
| Setting up parallel 100mmheight x 500 mm long | 01 Pair | 01 Pair | 01 Pair |
| Setting up parallel 100mmheight x 650 mm long | 01 Pair | ||
| Honing head 62 mm to 140 mm with stone | 01 No | 01 No | 01 No |
| Honing head 115mm to 215mm with stone | 01 No | 01 No | |
| Double end spanner 22/24 | 01 No | 01 No | 01 No |
| Handle type allen key 4mm | 01 No | 01 No | 01 No |
| Allen key set (9nos) | 01 Set | 01 No | 01 No |
| T-bolt with nut & washer | 04 Nos | 04 Nos | 04 Nos |
| Setting up parallel tightening bolt nut and washer | 06 Nos | 02 Nos | 02 Nos |
| Block tightening clamp | 04 Nos | 04 Nos | 04 Nos |
| Foundation bolt washer & nut | 04 Nos | 04 Nos | 04 Nos |
| Extension holder (medium) | 01 No | 01 No | 01 No |
| Carrier holder (medium and big) | 01 No | 01 No | 01 No |
| Honning buff | 2 Sets | 2 Sets | 2 Sets |
| Operation manual | 01 No | 01 No | 01 No |
