All Geared Radial Drill Machine
HPSM’ manufactures, exports, and supplies Heavy Duty All Geared Radial Drilling Machine. These Geared Radial Drilling Machines are manufactured in compliance with the international standards by our skilled experts. The Geared Radial Drilling Machine, we offer, is manufactured using high-grade components & parts that ensure perfect drilling for large and small jobs. Moreover, the Geared Radial Drilling Machine can be availed at affordable rate.
Design Feature
- Main spindle made from EN Steel with 6 slots in machined by hobber and Morse taper bore is provided internally grinded.
- By Simple adjustment of only tapper wedge facility to set drill head on are guide way. Spindle sleeve is properly guided in honed drill head bore on 6 ball & roller bearing for smooth & accurate running.
- Main spindle made from EN Steel with 6 slots in machined by hobber and Morse taper bore is provided internally grinded.
- By Simple adjustment of only tapper wedge facility to set drill head on are guide way. Spindle sleeve is properly guided in honed drill head bore on 6 ball & roller bearing for smooth & accurate running.
- This machine has drilling radius up‐to 820 mm and Distance from base to spindle is up‐to 1040 mm. Due to such facilities we are able to provide good working area at low cost.
Standard Equipments
- Motor Pulley 2 Nos
- Drill Drift
- Oil Can
Extra Equipments
- Box‐Table
- Electrical Motors & Control Panel
- V‐belts
- Coolant Pump with Tank & Fittings
| Technical Specifications | HPS – 25 |
| CAPACITY | C.I. |
| Drilling Capacity | 25mm |
| DRILL HEAD | |
| 1. Spindle Nose | MT – 3 |
| 2. Spindle Travel | 200mm |
| 3. No. of Spindle Speed | 8 |
| 4. Range of spindle Speed | 80-1800RPM |
| POWER | |
| Spindle Drive Motor | 1HP 1440 RPM |
| Spindle Drive V-Belt | B-45 |
| WORKING TABLE | |
| L x W x H | 250 x 200 x 200mm |
| WORKING RANGE | |
| 1. Maximum Drill Head Travel | 355mm |
| 2. Distance from Column to Spindle Max. / Min. | 655 / 300mm |
| 3. Distance from base to spindle Max. /Min. | 880 / 175mm |
| 4. Diameter of column. | 130mm |
| BASE PLATE | |
| 1. L x W x H | 1005 x 605 x 125mm |
| 2. G.W./ N.W | |
| 3. Wooden Case Size L x W x H | 1100 x 700 x 1800mm |
| Technical Specifications | HPS-38 |
| CAPACITY | |
| Drilling Capacity | 38mm |
| DRILL HEAD | |
| Morse Taper of Spindle | MT – 4 |
| Spindle Stroke | 200mm |
| No. of Spindle Speed | 8 |
| Range of spindle Speed | 73-1800RPM |
| POWER | V-BELTS |
| Spindle Drive Motor (1.5hp) |
B-46 |
| Arm Elevating Motor (0.5hp) |
A-23 |
| WORKING TABLE | |
| L x W x H | 300 x 260 x 260mm |
| WORKING RANGE | |
| Drilling Radius Max./Min. | 820/320mm |
| Distance from Column to Spindle Max. / Min. | 745/250mm |
| Max. Drilling Head Travel | 495 |
| Distance from base to spindle Max. /Min. | 1040/250mm |
| Diameter of column | 157mm |
| BASE PLATE (WITH COOLANT TANK) | |
| L x W x H | 1225 x 675 x 135mm |
| Working Surface (L x W) | 740/550mm |
| No. of slots / Size | 3/16mm |
| DIMENSION | |
| Overall Height | 2050 |
| Wooden Case (L X W X H) | 1300 X 750 X 2050mm |
All Geared Radial Drilling Machine HPS-5(40MM)
| Technical Specifications | HPS-5(40MM) |
| Description | Capacity & Size |
| Capacity | |
| Drilling Capacity in MS | 40 mm |
| Drilling Capacity in CI | 45 mm |
| Tapping in MS | 25 mm |
| Rough Boring in MS | 60 mm |
| Drill Head | |
| Spindle Nose Tapper | MT – 4 |
| Spindle Travel | 170 mm |
| Number of Spindle Speed | 8 |
| Range of Spindle Speed | 60 to 100 RPM |
| Number of Power Feed | 2 |
| Range of Power Feed | 0.20 – 0. 10 mm Rev |
| Working Range | |
| Drilling Radius Max/Min | – |
| Distance from column to spindle Max/Min | 950 440 mm |
| Distance from spindle base Max/Min | 1150 – 320 |
| Diameter of column | 180 mm |
| Box Table LXWXH | 380 x 300 x 300 |
| Base Plate | |
| Base Plate Area LXWXH | 1350 x 760 x 160 |
| Working Surface | 870 x 630 |
| Number of Size of T-Slot | 3 / 16 mm |
| Power | |
| Drilling Motor ( Two Speed ) | 2 / 1400 Hp / RPM [50 Cycle] |
| 2 / 2800 Hp / RPM [50 Cycle] | |
| Elevation Motor for ARM | 0.5 Hp / 1400 Hp / RPM [50 Cycle] |
| Shipping Size Approx LXWXH | 1750 x 1000 x 2000 |
All Geared Radial Drilling Machine ( HPS 45 )
| Technical Specifications | HPS-45 (45MM) |
| Capacity | |
| Drilling Capacity | 45 mm |
| Drilling Head | |
| Spindle Nose | MT – 4 |
| Spindle Travel | 200 mm |
| Number of Spindle Speeds | 8 |
| Spindle Speed Range | 60 – 1350 rpm |
| No. of Power Feeds | 3 |
| Power Feeds Range | 0.10-0.20-0.30 mm / rev |
All Geared Radial Drilling Machine HPS 50/1350 (50mm)
| Technical Specifications | |
| Capacity | HPS-50/1350 (50mm) |
| Drilling (M.S.) | 50 mm |
| Drilling (C.I.) | 60 mm |
| Tapping (M.S.) | 24 mm |
| Tapping (C.I.) | 30 mm |
| Boring (M.S.) | 90 mm |
| Boring (C.I.) | 100 mm |
| Drilling Head | |
| Spindle Tapper | MT-5 |
| Spindle Diameter | 85 |
| Spindle Travel | 300 |
| No of Speed | 8 |
| Range of Speed | 30 to 1300 |
| No. of Spindle Feeds | 6 |
| Range of Spindle Feeds | 0.6 to 0.4 mm / rev. |
| Electricals | |
| Power Supply | 3 Ph, 415 V, 50 Hz |
| Drill Power | 3 Hp |
| Arm Elevating Motor Power | 1.5 Hp |
| Coolant Pump Motor Power | 0.15 Hp |
| Working Range | |
| Column Dia | 255 |
| Drilling Radius Max./Min. | 1325 / 445 |
| Distance from Column to Spindle Max/Min | 1200 / 320 |
| Distance from base to spindle Max/Min | 1210 / 400 |
| Max. Drilling Head Travel | 880 |
| Vertical Traveling of Arm | 880 |
| Base Plate working area (L x W) | 1220 x 770 |
| Box Table area (L x W x H) | 600 x 500 x 500 |
| Diamensions | |
| Base Plate (L x W x H) | 1750 x 950 x 220 |
| No. of T – Slot | 4 |
| Over all Dimensions (L x W x H) | 1800 x 1000 x 2450 |
| Wooden case size (L x W x H) | |
| Approximate Weight | 2500 Kg. |
All Geared Radial Drilling Machine HPS-65B(65mm)
| Technical Specifications | HPS-65B |
| DRILL HEAD | |
| Drilling Capacity(in steel/in cast iron) | 65/75 |
| Drilling Depth | 325 |
| Taper Spindle Nose Socket | MT-5 |
| No. of Spindle | 12(18-810) |
| No. of Spindle Feeds | 6(0.125to1.25) |
| Drill Power | 3.7 KW |
| CAPACITY | |
| Drilling Radius Max(A) Min(B) |
1700 500 |
| Drilling Head Traverse (C) | 1200 |
| Distance Base Plate to Spindle Max. (P) Min. (M) |
1500 300 |
| Diameter of Column Sleeve (D) | 8 |
| Range of Speed | 355 |
| Working Surface of the Base Plate G*H | 1500*1020 |
| DIMENSIONS OF BASE PLATE | |
| Length*width*Height(T*U*V) | 2265*1040*225 |
All Geared Precision Radial Drilling Machine
The Draft Of The Drill
- 30 Years well experienced engineers & technicians creates excellent quality of machine.
- High Efficiency, Longer Life & Less Expenses.
- Available in Extra Heavy Duty 3 models (1) Ø 40 mm (2) Ø 50 mm (3) Ø 65 mm
- Continuous quality control to achieve high accuracy as per ISI standard.
- All Parts are made by high strength cast & special material.
- Spindle running in a set of 3 Nos. best quality bearing, which permit heavy duty application.
- 9 Nos. spindle speed (50 to 80 RPM.)
- Radial arm swivels 360°
- Auto Power Feeds
Standard Accessories
- Electrical Consisting of main Motor.
- Elevating Motor, Control Panel.
- Limit Switch & Wiring.
- Built in Coolent Tank.
Optional Accessories
- Heavy Duty Box Table.
- Coolant Pump with Fittings.
- Machine Vice.
- Machine Lamp./li>
| Technical Specifications in mm | HPS-2 | HPS-3 | HPS-4 |
| CAPACITY | |||
| Max. Drilling Capacity in Steel (M.S.) | 40 | 50 | 65 |
| Max. Drilling Capacity in Cast-Iron (C.I.) | 46 | 56 | 70 |
| Tapping in Steel | 27 | 42 | 50 |
| SPINDLE | |||
| Spindle Travel | 150 | 250 | 300 |
| Spindle Taper | MT-4 | MT-4 | MT-5 |
| No. of Spindle Speed (Range) RPM | 9 (50-805) | 9 (50-805) | 9 (50-805) |
| Auto Power Feed | 0.115 | 0.115 | 0.115 |
| Optional Feed 6 | 0.13 – 1.10 | 0.13 – 1.10 | 0.13 – 1.10 |
| WORKING RANGE | |||
| Column Diameter | 228 | 280 | 330 |
| Max./Min. Distance Spindle Centre to Column Centre | 1160/550 | 1325/615 | 1700/700 |
| Horizontal Movement of Drilling Head | 510 | 710 | 1000 |
| Max./Min. Distance Spindle Nose to Base Plate | 1030/450 | 1080/480 | 1120/460 |
| Vertical Movement of Radial Arm | 580 | 600 | 660 | Working Surface of Box Table | 560 x 460 | 560 x 460 | 560 x 460 | Height of Box Table | 400 | 400 | 400 | Working Surface of Base Plate | 800 x 670 | 1020 x 800 | 1400 x 850 | Height of the Base Plate | 170 | 190 | 210 |
| CENTRAL | |||
| Drilling Head Motor (H.P. / RPM) | 2/1440 | 3/1440 | 5/1440 |
| Elevator Motor (H.P. / RPM) | 1/1440 | 2/1440 | 3/1440 |
| Base Plate Dimensions (Length x Width) | 1330 x 820 | 1680 x 930 | 2050 x 990 |
| Total Height of Machine | 2250 | 2360 | 2440 |
| Weight (Approx) kg. | 1750 | 2350 | 2900 |
